Kerr nelson HT leads

  • i got a set from fordprobestore but they dont fit, the 'shaft' that connects to the plug is 10mm longer than the ones i took off. they were described as '94 onwards and mines '98. i have emailed them but is there anything im missing, like not pushing hard enough to connect them! i didnt want to push too hard cos they cost £60, they did click but the seal bit didnt get near to the rockercover.

    any suggestions?

  • not sure totally. i would play safe and send back. or wait till you hear from the site before you start messing.

  • sorted it out, the seals slide down to the rocker cover and push into the plug holes.

    props to the guy at!


Copyright 2021 | Powered by NodeBB