<![CDATA[Kerr nelson HT leads]]>i got a set from fordprobestore but they dont fit, the 'shaft' that connects to the plug is 10mm longer than the ones i took off. they were described as '94 onwards and mines '98. i have emailed them but is there anything im missing, like not pushing hard enough to connect them! i didnt want to push too hard cos they cost £60, they did click but the seal bit didnt get near to the rockercover.

any suggestions?

]]>https://www.uk-mx3.com/topic/208/kerr-nelson-ht-leadsRSS for NodeThu, 12 Mar 2026 20:29:00 GMTThu, 21 Jun 2007 17:57:29 GMT60<![CDATA[Reply to Kerr nelson HT leads on Thu, 21 Jun 2007 17:57:29 GMT]]>i got a set from fordprobestore but they dont fit, the 'shaft' that connects to the plug is 10mm longer than the ones i took off. they were described as '94 onwards and mines '98. i have emailed them but is there anything im missing, like not pushing hard enough to connect them! i didnt want to push too hard cos they cost £60, they did click but the seal bit didnt get near to the rockercover.

any suggestions?

]]>https://www.uk-mx3.com/post/208https://www.uk-mx3.com/post/208Thu, 21 Jun 2007 17:57:29 GMT<![CDATA[Reply to Kerr nelson HT leads on Thu, 21 Jun 2007 19:34:07 GMT]]>not sure totally. i would play safe and send back. or wait till you hear from the site before you start messing.

]]>https://www.uk-mx3.com/post/4871https://www.uk-mx3.com/post/4871Thu, 21 Jun 2007 19:34:07 GMT<![CDATA[Reply to Kerr nelson HT leads on Sat, 23 Jun 2007 14:01:55 GMT]]>sorted it out, the seals slide down to the rocker cover and push into the plug holes.

props to the guy at fordprobestore.co.uk!

]]>https://www.uk-mx3.com/post/4874https://www.uk-mx3.com/post/4874Sat, 23 Jun 2007 14:01:55 GMT