Help needed



  • I have the fuel rails and everything needed to attach them, that's it.

    No hoses, nothing to move the two adjuster thingys at the back, one is in the same place as a K8, the other is at a 90o angle to it on the back\left hand side of it looking down.

    The millenia in the UK is the Xedox 9 a 2.3 V6.. would it be the same?

    I know it's the wrong type of IM but here:

    The K8 also has a number of black blocks under it, which mine lacks?

    I need to research this IM



  • http://www.ebay.co.uk/itm/151085634809?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

    Will take a trip to see this tomorrow morning.. might be lucky.



  • The actuators in the pic are the two vris solenoids the k8 will have matching as they are controlled by the ecu so will swap over fine.
    The k8 will have a load of egr pipes etc which you won't need.
    I could map out my vacuum set up but I'm on a straight neck not a curved so may be different.



  • The second on is mounted at a different angle on the ZE to the K8. The first one does thou.



  • It does not matter how or where they are mounted. You could make a bracket up and mount it anywhere.



  • I'm not sure if these guys are too far from you or not???

    Nippon Autospares

    Address:
    346 356 Abingdon Business Centre, Osmaston Road
    Derby
    DE24 8AG

    Tel:
    01332 293399

    These guys would probably have what you need, but they are real cowboys. They would say they had it in stock even if they did not!!

    They only way to deal with them would be to phone them and see if they will even let you have parts of an engine instead of the whole thing, then check if they have any in stock, then tell them you will come down and have a look bearing in mind that they might not have what you want even if they said they would.

    Do be careful with these guys they are idoits. Its a real last resort.



  • @bee0afcac8=Lori:

    http://www.ebay.co.uk/itm/151085634809?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

    Will take a trip to see this tomorrow morning.. might be lucky.

    Lucky would be the owner actually showing the frack up.

    Oh well.

    Admin, do I take everything off the K8 and just mount it the same with some custom brackets? I don't recall the manifold I have ever having the black boxes underneath it.



  • I think I have a complete K8 inlet manifold sat in my shed at work with all ancillaries attached, will try to get in there tomorrow to have a look



  • @64217cd6cc=djmarcopolo:

    I think I have a complete K8 inlet manifold sat in my shed at work with all ancillaries attached, will try to get in there tomorrow to have a look

    I've got the K8 one bud, been informed it's the same I just need to adjsut the 2nd vacume thingy bracket, but thanks for the offer :)



  • How's it all going lori ?



  • On hold now as I'm getting married on the 10th Aug. :)

    Got the week off after the holiday so hitting it up hard after that.

    Picked the color thou :) - A 40/50% mix of matt black and shot primer.



  • Id get it back on the road first lol. Get the klze revving!!!



  • Oh yeah I will do :) Once the wedding is done, I want nothing more. lol

    Just future planning.



  • I was thinking of a mx3 road trip to see a few members mx3 and was thinking of coming your way but don't have the funds now. Think mine will be back off the road September so I can get some bits finished.



  • @c702c53ee3=Garfy1981:

    I was thinking of a mx3 road trip to see a few members mx3 and was thinking of coming your way but don't have the funds now. Think mine will be back off the road September so I can get some bits finished.

    Would have been nice, I could have chucked ya some cash for any\all help given as well :) - I have to be honest, I'm an IT guy, not a mechanic lol this stuff is complex.


 

Copyright 2021 UK-MX3.com | Powered by NodeBB