SstennizZ 1992 KL-ZE
-
not seen any updates for a while from such a regular member ? have we lost another mx-3er?
-
Hell no.. :P
Got a lot done and or planned.. :P
Give me a lil to translate.. :lol:
-
Cool, good to see you still around dennis, you just vanished since japfest :D
-
Since this year I have decided to get my MX ready to do some serious Time Attack races next year.
I recently started renting a garage with two mates of mine, so now I have both the room and time to get everything done.
So here's the planning so far:Things I hadn't mentioned yet:
-
Anodized red oil catchtank
-
Relocated the battery to the rear of the car
-
Redone my audio in the rear
-
Annd a LOT more decals.. :P Haven't got them all on pictures yet..
Ever since castle comb, I've been yearning to get back on the track.. :P
To-do for this winter until the first TA:- Air filter (This one has "only" been on for like 4 years, and I want a bigger one..)
- Heatwrapping the headers
- Master cutoff switch for the engine (must have for TA)
- Fitting some mesh in the front bumper
- Redo the bottom of the car (rust treatment)
- Replace as much hoses as possible in the enginebay
- Improve stability of the chassis (whiteline swaybar, K6F suspension parts)
- Grooved brembo discs all around and green- or yellowstuff pads
- SS brakelines
- Custom SS midpipe from decat to backbox
- Actual racing seats
- Fire extinguisher
- Better track helmet
And a little lower on the priority list:
- Replace the wanli's and kumho's for something in the size 205-40-17
- iven more decals! :P
- Make a rain deflector, because of the scoop in the hood
- Replase gas hoses for SS ones..
This week I fitted an oil cooler with mocal sandwitchplate. Took some work getting the cooler to fit, but today I tested it. Like predicted it takes a lot longer to reach the right temperature, but when I put it to it's limits, it actually stays within reasonable temperatures now. I could attach a thermostat, but for now this'll work. Since I'll only use it for the track or long drives, it takes a little longer to get to the right temperature, but it will get there.. I just need to restrain myself a bit longer..
Pictures:
Sandwichplate with -10 fittings and hoses (old filter btw):
Cooler and hoses:
And last but not least, a package has arrived at a mate of mine in Los Angeles (where I'll be going on holliday). It's my two MSD digital window switches with loom! :P With them I can finally get the right VRIS times programmed! :P
Well that was it for now.. :P Doing a little track time this weekend. I'll post some pics next week.
-
-
good to see the work coming along, I am guessing another visit to castle combe next year :wink:
-
looking good, the cooler does make alot of sence, i have the next size up cooler and i love it !, looking good, interested to see effects of sway bar, im wanting to get the bushes uprated but sourcing them is expensive :(
-
Today I took the semis for a little "drive".. :P Damn things have even more grip in the rain then my daily wheels.. So my hope is up again for the tracktime tomorrow.. :P
-
I bet that audio system helps out alot with time attack :lol:
-
@d2101941ba=Mooneggs:
I bet that audio system helps out alot with time attack :lol:
It's bolted to the sides.. Standing in my garage right now..
-
Dennis has left us with his mx-3 and went to a nissan S13 project. As you can read in my newbie post i bought the rare items of his car to add to my collection of rare items. i knew dennis from other forum and i learned we had the same car. when he was selling his mx-3 in parts i bought the best of it :)
-
he also sold a lot of parts to a member on here but took thge money and never posted them so any info on where he is now is much appreciated
-
i will contact him about that
-
OMG i have got to find one of these hoods one day BTW your car is hawt :bigok:
-
@30b6aca4d6=kulluminati777:
OMG i have got to find one of these hoods one day BTW your car is hawt :bigok:
Those hoods are available from a styling shop in holland, I have seen them online for around 400 euro
-
That hood is not for sale in the Netherlands.
He bought it from a Belgium member who imported it from the US or Canada.
I think it was part of a tiny production batch (3-5-10 pieces)
-
@b6a169e63a=whitefinish:
That hood is not for sale in the Netherlands.
He bought it from a Belgium member who imported it from the US or Canada.
I think it was part of a tiny production batch (3-5-10 pieces)there where 12 made by pakfeifer with gold cf.
this was dennis comment earlier in this topic.
@b6a169e63a:
Weighs about 33 lbs with functional scoop.
One of only 12 testmodels made by pakfeifer. Ended up to be to expensive to produce (aluminum subframe and high grade gold reflecting carbon fiber), so the ended up producing it with a bulkier and bigger scoop and cheap silver reflecting cf.
Fits nicely for a testmodel.
-
i see the post he had made and i have heard there is only a few of these but i only know 2 people with them…wheres the rest? lol
And if anyone did have a lead on one i would be really grateful :respect:
-
aeroworks make this vrs carbon bonnet for £600 on the continent and available in the uk
http://www.autohispania.com/carbon-style-hood-mazda-aeroworks-carbon-hoods-p-85220.html
but this one from pakfeifer is very similar, just look through there are loads of mx parts in this shop and I was pretty sure the carbon one was from here too and surprising yes from holland
http://www.showoffimports.nl/product.php?productid=27416
-
@a2750a60c3=kulluminati777:
i see the post he had made and i have heard there is only a few of these but i only know 2 people with them…wheres the rest? lol
And if anyone did have a lead on one i would be really grateful :respect:
If I ever want to sell mine you will be on top of my list
-
Here is the one with the VIS style
http://jeroentje.nl/index.php?page=product_view&product_id=10150601&car_id=4
The car in the picture you've posted was Yence his car (unfortunatelly at a JY now).
It was a really nice car untill he sold it and the next owner fu… it up.
