SstennizZ 1992 KL-ZE



  • Thanx mate!
    Had a nice pre-japfest meet yesterday:
    http://sstennizz.hyves.nl/album/63728716/JAF 2011//



  • your car is looking hot mate :)



  • looking great love the front bumper



  • love it. Did my bumper like that when I first went ZE, but it cracked so had to give up on it. You've inspired me to try again though :) That hood is very nice.



  • nice hood and wide mouth :wink:

    it's funny we virtually did the same mods at the same time… :o



  • not seen any updates for a while from such a regular member ? have we lost another mx-3er?



  • Hell no.. :P
    Got a lot done and or planned.. :P
    Give me a lil to translate.. :lol:



  • Cool, good to see you still around dennis, you just vanished since japfest :D



  • Since this year I have decided to get my MX ready to do some serious Time Attack races next year.
    I recently started renting a garage with two mates of mine, so now I have both the room and time to get everything done.
    So here's the planning so far:

    Things I hadn't mentioned yet:

    • Anodized red oil catchtank

    • Relocated the battery to the rear of the car

    • Redone my audio in the rear

    • Annd a LOT more decals.. :P Haven't got them all on pictures yet..


    Ever since castle comb, I've been yearning to get back on the track.. :P
    To-do for this winter until the first TA:

    • Air filter (This one has "only" been on for like 4 years, and I want a bigger one..)
    • Heatwrapping the headers
    • Master cutoff switch for the engine (must have for TA)
    • Fitting some mesh in the front bumper
    • Redo the bottom of the car (rust treatment)
    • Replace as much hoses as possible in the enginebay
    • Improve stability of the chassis (whiteline swaybar, K6F suspension parts)
    • Grooved brembo discs all around and green- or yellowstuff pads
    • SS brakelines
    • Custom SS midpipe from decat to backbox
    • Actual racing seats
    • Fire extinguisher
    • Better track helmet

    And a little lower on the priority list:

    • Replace the wanli's and kumho's for something in the size 205-40-17
    • iven more decals! :P
    • Make a rain deflector, because of the scoop in the hood
    • Replase gas hoses for SS ones..

    This week I fitted an oil cooler with mocal sandwitchplate. Took some work getting the cooler to fit, but today I tested it. Like predicted it takes a lot longer to reach the right temperature, but when I put it to it's limits, it actually stays within reasonable temperatures now. I could attach a thermostat, but for now this'll work. Since I'll only use it for the track or long drives, it takes a little longer to get to the right temperature, but it will get there.. I just need to restrain myself a bit longer..
    Pictures:
    Sandwichplate with -10 fittings and hoses (old filter btw):

    Cooler and hoses:


    And last but not least, a package has arrived at a mate of mine in Los Angeles (where I'll be going on holliday). It's my two MSD digital window switches with loom! :P With them I can finally get the right VRIS times programmed! :P

    Well that was it for now.. :P Doing a little track time this weekend. I'll post some pics next week.



  • good to see the work coming along, I am guessing another visit to castle combe next year :wink:



  • looking good, the cooler does make alot of sence, i have the next size up cooler and i love it !, looking good, interested to see effects of sway bar, im wanting to get the bushes uprated but sourcing them is expensive :(



  • Today I took the semis for a little "drive".. :P Damn things have even more grip in the rain then my daily wheels.. So my hope is up again for the tracktime tomorrow.. :P







  • I bet that audio system helps out alot with time attack :lol:



  • @d2101941ba=Mooneggs:

    I bet that audio system helps out alot with time attack :lol:

    It's bolted to the sides.. Standing in my garage right now..



  • Dennis has left us with his mx-3 and went to a nissan S13 project. As you can read in my newbie post i bought the rare items of his car to add to my collection of rare items. i knew dennis from other forum and i learned we had the same car. when he was selling his mx-3 in parts i bought the best of it :)



  • he also sold a lot of parts to a member on here but took thge money and never posted them so any info on where he is now is much appreciated



  • i will contact him about that



  • OMG i have got to find one of these hoods one day BTW your car is hawt :bigok:



  • @30b6aca4d6=kulluminati777:

    OMG i have got to find one of these hoods one day BTW your car is hawt :bigok:

    Those hoods are available from a styling shop in holland, I have seen them online for around 400 euro



  • That hood is not for sale in the Netherlands.

    He bought it from a Belgium member who imported it from the US or Canada.
    I think it was part of a tiny production batch (3-5-10 pieces)


 

Copyright 2021 UK-MX3.com | Powered by NodeBB