Decat Pipes



  • Can you do any rolling toad tests to find out if there's any gain from the pipe when it's installed? I have heard some stories of custom pipes reducing power, although it's very rare. I would be interested though if the price is right :)



  • Isit a Tig welder? if it is a might have a job for you would have serious problems with a mig doing it



  • @2442e311d9=Welly:

    Isit a Tig welder? if it is a might have a job for you would have serious problems with a mig doing it

    Well, I'm no welder, but isn't TIG more for Stainless stuff?
    All I've been told thus far is it's possible and I need to gauge interest before he starts to look into it and buy materials.

    As for gains, I have no proof, but most decats will release up to 15% power.

    Guess it depends on the car…



  • the 1.8 and 1.6 cats are different the a different thength and the flanges are at a different angle to the middle pipe



  • @1c82892769=nexussteve:

    @1c82892769=Welly:

    Isit a Tig welder? if it is a might have a job for you would have serious problems with a mig doing it

    Well, I'm no welder, but isn't TIG more for Stainless stuff?
    All I've been told thus far is it's possible and I need to gauge interest before he starts to look into it and buy materials.

    As for gains, I have no proof, but most decats will release up to 15% power.

    Guess it depends on the car…

    Tig welding is with a stick

    you can mig stainless



  • I mig welded a stainless exhaust Friday at work its fine just make sure your joins are clean, and use a decent amp welder.



  • i am interested, let us know when find out costs.etc….



  • Ok cool.

    Can we start a list please?
    I'm only gonna have a template for the V6, unless someone can help me with the 1.6?

    Gonna need at least 5 names to make it worth while methinks!

    • Nexussteve - V6


  • any chance of a full straight thru center pipe for the V6 as these are unavailable to buy anywhere except america



  • American order finishes in 2 days. If you can find it there, I can ship it back.



  • @08896df403=djmarcopolo:

    any chance of a full straight thru center pipe for the V6 as these are unavailable to buy anywhere except america

    I'll ask!



  • I am definitely interested in the de-cat, and maybe anything else to make my car more awesome! :p



  • what would you need as a template? don't suppose a pic would do it? i asume that it would not be mot freindly? want one though if it can be done.



  • MOT wise it does not matter an emission test will be carried out according to the engine age. Most cars that have de-CAT pipes fitted pass CAT emissions test, just make sure the car is very warm before the test is carried out.



  • You can also put in additives that lower your emissions for a day! ^^



  • Ok, so to sum up, these are the numbers thus far:

    -Nexussteve
    -Ash
    -DJMarcoPolo (straight through middle section)
    -Mattuhh

    Will hopefully be getting a rough quote this week, so let me know if anyone else is interested so it makes it worth his while!



  • **For reference, here's the MX-3 stock downpipe next to the stainless KL version:

    The branches are longer on the MX-3 version simply because the manifolds are shorter. When mated to the correct fanimolds, this section is the same length. You'll note that the cat-side section is markedly longer, however…

    From this image it looks like approximately 190mm longer - so you'll either need a 190mm shorter cat, or a 190mm longer mid/back section if you're going decat. I can measure more precisely later when it's not windier than God's arse outside.**



  • any news on them decats yet??



  • Would love to de-cat mine.



  • I have to have the 3 back off the road by end of next week, so once I've swapped the cars over, I can then get to work taking the exhaust off!

    Fingers crossed, I should have more info for you by end of month! :)

    Sorry for the wait guys!


 

Copyright 2021 UK-MX3.com | Powered by NodeBB