Rear Disc Help…
Does anyone know how to get the rear disks off????
Maybe im having a thick moment but after removing the calipers I cant see how its done and I dont want to resort to sledge hammer until ive asked on here….
tinyrhino last edited by
I've not done a mazda but on all the others I've changed there was a small screw that kept it in place when the wheel was off.
james lee last edited by
yeh thay can rust on to the hub just wants a to be hit off with hammer
if you have taken the screw out as tinyrhino said
Cheers guys, theres no screw in there, a hole where a bolt or screw would have been…..looks like its tw*t the hell out of it with the hammer then!!!!
4 terras last edited by
i did mine not so long ago. take out the 2 screws on each disc then hit it with a mallet.
Found a cunning and devious plan on MX3.com.
WD40 where the center of the disk meets the hub then use a 12mm bolt through one of the redundant holes in the disk to push it off as you tighten the bolt. I think im going to try WD40 then mallet first.
Thanks for the help everyone.