Belt pulleys



  • Looking for some nice shiny colored belt pulleys. Anyone know of anywhere to get them for the 4 pot?



  • **I'd wager the bods at MX5parts.co.uk will have something to suit the 4-pot.

    Edit: They do the pulleys, but not colourific ones. I'd imagine powdercoating a balanced pulley might be a bad idea, but anodising would work. If expensively so.**



  • @82b78192aa=Famine:

    **I'd wager the bods at MX5parts.co.uk will have something to suit the 4-pot.

    Edit: They do the pulleys, but not colourific ones. I'd imagine powdercoating a balanced pulley might be a bad idea, but anodising would work. If expensively so.**

    I've seen some on Demon Theifs but they don't do them for the MX3 (surprise surprise :roll: )



  • You should be fine with MX-5 bits. A B6 pulley is a B6 pulley - if it was internals, specifics would be desireable - but I shall ask my tame mechanics.



  • There's an underdrive pulley that fits the b6 too, from looking around on t'internet though there's quite a mixed reaction to them :/

    @696355159c=Famine:

    You should be fine with MX-5 bits. A B6 pulley is a B6 pulley - if it was internals, specifics would be desireable - but I shall ask my tame mechanics.

    Was reading up on mx-3.com a while back and people have put in uprated MX-5 cams (set 180° out), pistons & stuff into the 4-banger '3. Meant to make a very healthy difference too.


Log in to reply
 

Looks like your connection to UK-MX3.COM was lost, please wait while we try to reconnect.