Welly's - GT4 Engine Swap Project (Celica GT4 / MR2 REV3)



  • http://youtube.com/watch?v=8T7EZyT2n00

    engine has a few faults, engine managment light which is cutting boost and power :(

    most of engine sensors arnt working either.

    we'll sort it.



  • v nice project mate .

    but with your base car being a stock 1.6 automatic , you will have to change a hell of a lot of parts ! or she will go boom



  • gear linkages toyota,drive shafts toyota,engine toyota with AM internals,

    she aint going to go boom mate.

    in the video was only bossting about 4psi because of ecu and sensors..just wait till we boosting the standard 16.7 should shift then abit more for scooby teasing lol

    front suspension legs changed for V6 ones as a a little bit stiffer.

    engine mounts all made perfect etc.



  • On road 1st september.

    dumpvalve next and Ct20 turbo :wink:

    Dads having a word with his mate, works for rolls royce think hes making us a manifold and down pipe.

    more pics when shes on road and a few videos'



  • http://i202.photobucket.com/albums/aa217/WellyMX3/S5030179.jpg

    new centre box :lol:

    http://i202.photobucket.com/albums/aa217/WellyMX3/S5030174.jpg

    were air filter goes down wing..

    http://i202.photobucket.com/albums/aa217/WellyMX3/S5030168.jpg

    nice clean air filter. (new)

    nex things coming: Turbo,Ecu,Controll unit for intercooler,dumpvalve and other parts.



  • coming in next 3 months:

    Mopad Ecu and base with digi dash. £900
    Turbo rebuild from fensport good for 1.5 bar. £760
    magnacor leads
    blitz iridum plugs . £50
    Fidanza flywheel : £300
    Nitrious - TBC
    manifold and down pipe ( S/S ) £450
    Hks cam gears £189
    Fmic- £600
    Apexi turbo timer : £100
    Carbon Vented Bonnet £500
    Carbon Rad support £ 120
    Carbon fuel hatch £40
    Injectors 889cc
    High pressure fuel pump
    Fuel pressure adjustable regulator
    Je pistons

    Got a sponser :D

    be coming off road again once all parts brought engines coming out again, to be fitted with some new bits :D


  • admin

    whos the sponsor??

    Jono



  • mx3 nutter, also.

    from america



  • Blown turbo nearly its not boosting right at all.

    sooo better hurry and get new 1:(

    still popping and banging away tho:D



  • update!!

    its boosting off the turbo gauge!!

    damage was, burn exhaust side of turbo,blown 2 holes in exhaust manifold,and blowing inlet rubbers away, but been told its easy and loses traction soon as boost comes in,



  • have i missed the part where you have uprated the brakes???



  • no..

    there mx3 ones still..and yes they do stop it very well..

    jsut set on fire sometimes.

    if you know how to break then your ok,engine breaking works well..



  • HKS Carbon style, Sequential Bov.


    FCD

    should all be fitted by saturday..will get new video off it boostin its tits off :D

    oil and spark plug change soon..

    TRD Sport oil filter, iridium tipped plugs.



  • can't wait to see this in action! demands videos



  • wait my fellow.

    soon as its running perfect..maybe saturday in car view ;) tshhhhh



  • New ngk plugs in.

    Platinum screw part, titanium tip. £14.50 each.

    searching for a turbo still.

    few pics.


    badge


    HKS Sequential BOV (bracket custom made, :D)


    engine shot



  • New Ecu - Remapped and chipped :)

    Boost Gauge And Pod - soon to be mounted on drivers, pillar.

    Abit of a udate.

    Custom Downpipe Made by us of of stainless 3".

    Turbo's been changed around 3 times and again tomorrow (sunday)

    so wait for aloud of picture to be uploaded :)

    downpipe etc :wink:

    all get you guys a video soon.



  • i went out in it earlyer this week, sorted a few things, and soon as the boost came in it felt like your head was being crushed on your forhead lmfao.

    but its running alot faster since i last went into it now, according to my dad…its hectic . so more video's will be on the way

    ready for some discs and pads also, getting some break fade now its running better under breaking, infact they stopped working the other week lol, so had to pump them like fuck, but they worked. so now looking into break upgrades possibly gt4 breaks.



  • thought you would of upgraded the breaks when you did the swap. as putting that power from the gt4 engine at that boost would defo needed some extra stopping power. (just my thought)



  • More boost :) 21lb of boost now.

    breaks being looked into as they set on fire the other weekend sparks coming from wheels and pads was dead. 285mm discs and some nice calipers.

    sorting a few more things with engine out.

    will get a video of 21lb out of boost coming in at the weekend for you all.


 

Copyright 2021 UK-MX3.com | Powered by NodeBB