MDM MX3 3 stage project, neone wana roba bank with me ha ha



  • u sorted out the ecu for it. dont use th k8 ecu u will be bitterly disappointed if u do. also did u pay extra for the millenia intake or haveu gone straight neck?



  • you want the k8 ecu chiped for the millenia inlet
    dont use a kl de or ze ecu



  • yup get a probinator for the k8 ecu curved neck setup. But you can chip kl31/kl36s with probinators chip, just a bit of a waste, may as well give the kl31/36 to a straight neck owner :)



  • Lol to right marco. but lads is anyone selling a chipped K8 ecu.

    Marco looking at you to help me out on this one lol.

    and ya its the curved neck



  • Lol to right marco. but lads is anyone selling a chipped K8 ecu.

    Marco looking at you to help me out on this one lol.

    and ya its the curved neck, i went with it now cause its cheaper and i can always change the IM at a later date for about £130.



  • marco screw u :P how about u come over england and lets see how ur chipped k8 ecu goes against my kl31 ecu on a millenia intake :P oh yes just remember ive got a bit heavy spoiler on my car also :)



  • :lol: maybe I will do that and show you that VRIS isn't for decoration :P

    Seriously though, I'm shocked you're wasting power not having them timed right!

    Tell you what though, probinator maps are toooo rich. I got an AFPR to calm them down a bit. Oh well megaquirt is slowly advancing, and then I can map whatever I want, and no VAF :D



  • @ced4e3662a=Marco:

    Oh well megaquirt is slowly advancing, and then I can map whatever I want, and no VAF :D

    Thats the way forward.



  • so true megasquirt for life. basically all i did was match the ecu with engine head code. my head said kl31-1a1 so i got the kl31 ecu and beleive me compared to running the stock k8 ecu its not wasting power :) ask the got in wannabe skyline who tried to beat me at the light tonight. pfft he only had the 2ltr straight 6 not even a turbo pfft. i mean wtf was he hoping to accomplish. shame he obviously thought it was just the 1.8 v6 :D when will they learn :)



  • talking about crowns :) ill take the first 3sgte mx3 in the world crown thank you :)



  • Well lads its in, not with its bumps, the lads in the garage had a problem or confusion mating up the vacume lines,

    is there anything i should let them know, remember i have the curved neck manifold.

    Almost there now lads, only 800 to put in engine, new cv's, clutch slave cyclinder, full service, belts the lot.



  • sounds like u got a bunch of monkeys working on it bud, no offence, should always do abit of research before hand! and get a diagram of engine in case the monkeys get lost swinging tree to tree.

    jsut hope they dont fuck it up :)

    GL man!



  • I am sure they will work it out, you be so happy with the power. Its what the MX3 should of had in the first place. :P



  • congrats morris, well done on it friend!



  • @b4b7dc94e3=MDM_MX3:

    Well lads its in, not with its bumps, the lads in the garage had a problem or confusion mating up the vacume lines,

    is there anything i should let them know, remember i have the curved neck manifold.

    Almost there now lads, only 800 to put in engine, new cv's, clutch slave cyclinder, full service, belts the lot.

    :lol: If you want a job done right, do it yourself ;)

    http://mx-3.com/phpBB3/viewtopic.php?f=23&t=63734



  • HE HAS SPOKEN!!!!!!!! :lol: :lol: :lol:



  • ..eh?! lol :lol:

    Forgot to say congrats :D We must have a wee race, c'mon up to bishopscourt ;)



  • @332ef71554=Marco:

    ..eh?! lol :lol:

    Forgot to say congrats :D We must have a wee race, c'mon up to bishopscourt ;)

    i might take you up on that one marco!



  • woohoo cmon up and lets give the CTRs some comp :D



  • dont forget i'm only runnin the k8


 

Copyright 2021 UK-MX3.com | Powered by NodeBB