Spitze Inlet Manifold - For KLDE / KLZE
-
Yea gareth, only problem is the GSXR 600 TBS will seriously have to be shortened as the front bank was too high up even after the ports modded.
It could work and would truly sound great. My frend and i worked out that you would need to mill down the ITBs by nearly an inch and there would definatley need to be some bonnet work or Custom cowl to get cold air to them so close to the inner surface of the bonnet.
I can send you some measurements i took if you like, it could be done all in including map for around 1k. Not sure of potential power inc? 15-25bhp with map, including removal of AFM maybe
-
Heres a pic of the recommended Inlet guys…...thought a few may think its a tad more suited for the Job...... 8)
-
and how much would that cost? :?
-
here you go tom, I wont go on too much and steer this topic off direction but….
a throttle bodied KLZE in a mazda mx5, est 250bhp.
I want to boost the power of the ze some how and im not decided what path to go down yet. im 30% throttle body 30% super charged 20% NOS and 20% Turbo charged. What ever i end up doing it will have a LSD gearbox first and ecu set up ready.
I know turbo is the cheapest and prob produces the most power, but im thinking that its been done and adding more heat to a hot NA engine will end in tears !!
So theres supercharging and throttle bodies, as i want a track car throttle bodies will be lighter and offer more instant response. Im sure i figure it out in the end, I keep you posted 8)
-
Got a link to info about that mx5 garfy? I wouldn't mind looking into that setup myself.
-
sweet as… weird seeing the ze that way round!
-
yep heres a good link to open your eyes into the world of V6 tuning so make sure you add it to your favorites.
oh i made a mistake the engine is a KLDE hence makes 180whp. But im sure if it was a ZE it would make 250bhp at fly.
-
Tommy D
where to and how much for that beautiful manifold ?
-
That rounded IM looks like the one made by a new zealand tuning company, who no longer exist. Not many of them made.. So good luck!
-
http://mx-3.com/phpBB3/viewtopic.php?f=2&t=63257
THe one and only is on sale $800 including fuel rails, uprated injectors. Apparently adds 40whp over ms8 when turbod, but fa for NA!
