Jono's KLZE Project - Turbo Build Begins



  • you have any photos of what you did with the boot etc how you fixed the sides etc.



  • that install looks smart i want to do a similar thing, but with out the 6x9s and the power cap. looks good and keeps boot space.

    what have you done with your old alloys?


  • admin

    Old alloys are sitting in the garage! lol

    Jono



  • wanna get rid of them?

    name the price.


  • admin

    One has been repaired, so 3 are good, one has repair I can post pics if your interested.. make me an offer!

    :)

    Jono



  • put a pic up and offers will flow.


  • admin

    Btw… my old alloys are for sale if anyone is interested, look at the Old Alloys pic above...

    Jono



  • @845816bd84=jono:

    Dials: (Crappy Pic from Phone)

    Jono

    Umm is your car overheating really bad? or is the needle just messed up?! lol


  • admin

    Lol your the first one to notice that! lol

    When fitting the dials I had to remove the screws from the temp & fuel gauge, when I put them back in (upside down) the clamp fell out so the gauge was not getting a signal and just went right to the top lol

    Fixed now tho

    Jono



  • @ae66798946:

    my old alloys are for sale if anyone is interested, look at the Old Alloys pic above…

    how much are you looking at for them?


  • admin

    @b429e15f8f=burger28:

    how much are you looking at for them?

    Not sure yet, around £20 - £30 each

    Pm me with an offer

    Jono



  • let me know if you have questions for fitting for the piping and all… I can send you pics of the way I did it... dont give up its worth it.



  • that booy install, did it take you long?


  • admin

    @87787339f3=aiden:

    that booy install, did it take you long?

    One day + 3 evenings after work :)

    Jono



  • cool, did you fix the side pieces?


  • admin

    Not fixed to the car yet! At the moment they are jammed in place and secured by some screws to the wood holding the power cap…

    I dont really wanna damage any of the internal trim!

    If anyone is gona be down donny south on the 19th then let me know and we can meet up there also im gona be testing the ZE on the 0-60 strip :)

    I also have some good news... I will have my ZE ECU on saturday, which will be in time for the 0-60 sprint, cant wait to try it :D

    Jono



  • the boot install is really nice, all have a place nice and tidy 8)


  • admin

    Small Update…

    Well the car has had a little work dont lately..

    Changed the Cam Cover Seals - It was leaking oil before and managed to screw up the ignition (oily spark plugs and ht leads is not good!!)

    I didnt change the seals when the engine was out, might I suggest that anyone doing a ZE swap do this before, as the IM is a bitch to get out when its in the bay!

    Besides for £20 its worth it.

    Obviously all new spark plugs and as of last night some brand new 10mm Blue HT leads :D

    I will try to get some pics up today...

    On another note, I have a slight issue with the car still not running right.. I have a feeling I might have a dodgy o2 sensor or 2 :(

    Can I also make a note about www.fordprobestore.co.uk - Excellent fast service :)

    Jono



  • @c3595ddd96=jono:

    Changed the Cam Cover Seals - It was leaking oil before and managed to screw up the ignition (oily spark plugs and ht leads is not good!!)

    This happened to my k8 too, oil on top of the plug. Rear bank of course - IM is a bit of a pita to take off. Think I shall change mine when the ZE arrives. Also trying to decide whether to replace the valve springs & retainers or not. You running ze springs & retainers? Worried about valve dropping due to weak retainers?



  • umm, ive got oil in the front bank of mine
    you said ofcourse to i bein the rear bank
    is the front baddd??


 

Copyright 2021 UK-MX3.com | Powered by NodeBB