Polycarb Rear Window GB 2011\. + Weight reduction discussion



  • they are all wrapped up and ready to be shipped :D ,
    i was hoping for a pic before they were shipped but they are all wrapped up now :(
    hopefully they are fine, if not i just have to take the blame lol, although im sure they will be as there are no complaints ive heard about their products.
    They will be going out monday, if i get any kind of tracking numbers i will pm you guys.

    cheers
    Gareth



  • can you all post on here when they arrive safe and well. cheers guys



  • Mine's arrived, not opened it yet as I've not got space to ATM, but packaging was fine, so I'm sure its fine 8)



  • Just arrived :) looks good so far!



  • Mines arrived thanks not opened it yet



  • Mine arrived today too!. Also haven't checked yet but notice there is a label marked report damage within 7 days so that's the deadline if you want to check them.
    Just rob still waiting.
    Also need some photos for website if anyone wants to volunteer. could be future discount on persex sliders !. :)



  • just opened it and it looks great very happy thanks garfy

    next thing how do you fit it lol



  • well their website sells siloflex, whcih keith ( djmarcopolo ) uses on his boats so you can either get some online or tap keith up :D , rob was talking about riviting it in, but im not sure how that would go??.
    I was just going to try and find someone who works for the likes of autoglass and lives local and wave some cash at them !!.



  • well mine is ment to be as light as possible so a thin bead of silicone to keep it water tight and then alu rivets all around it.

    silkoflex is a good option but tough to use unless you have a good caulking gun.



  • i still have to remove the glass. i would suggest to all that got it not to leave it standing or lying flat for long as poly carb can sag if its not supported
    i have mine sitting on the rear hatch.

    i'm going to take the hatch off and thake the glass out of it in the back garden.

    i just need to buy some alu rivets now



  • i did wonder if it would deform ? mines sitting inside car at moment as its all stripped out !
    I thought you already had glass out rob from previous pictures?



  • only 2 small inch strips left to go! absoloute arse to get



  • where i'm pointing to is where the cold knife couldnt cut because of the mounting tabs hence the other knife (it might look useless but this increadably sharp)

    once the window is out cut all the old glue off

    just mocking it up for now i know i could of cleaning the frame a bit but i'm debating on making up a mould for it



  • Looks like a good fit, mines still in its packaging, not had anytime to have a looky yet :roll:



  • I spent about 2hrs trying to cut the glass out what a pain I gave in in the end lol



  • what where you using jay? dont give up! i was geuninely happy to see i got the thing out without breaking it!



  • @bb11553219=robx1r:

    what where you using jay? dont give up! i was geuninely happy to see i got the thing out without breaking it!

    i was using a stanley knife by i may get too stressed and use a big hammer lol



  • when using blade use a new one and make shallow passes. the top of the window will be impossible to cut without a coldknife!

    the polycarb window weighs 6.6 kg and the glass one weighs in at a whopping 17kg



  • Looking good guys, anyone finished installing it yet?

    I agree with garfy i'd get a pro installer form auto glass etc to fit it off the books.

    As for weight saving, don't forget that UNSPRUNG WEIGHT and ROTATING MASS make the biggest difference to the performance of your car.

    Unsprung:
    Ultra Lightweight alloys, tyres, air, discs, calipers, a percentage of your struts etc

    Rotating Mass:
    Lightweight Flywheel, Lightened balanced crank (but think about your usage and the stored energy effects).

    @cd73f391f0:

    Unsprung weight includes the mass of components such as the wheel axles, wheel bearings, wheel hubs, tires, and a portion of the weight of driveshafts, springs, shock absorbers, and suspension links. Even if the vehicle's brakes are mounted outboard (i.e., within the wheel), their weight is still considered part of the unsprung weight.

    @cd73f391f0:

    You probably hear the term unsprung weight bantered around in suspension circles, what is it and why should I care

    What is unsprung weight- well it's weight that is not supported by the springs- that's easy! Sprung weight is your chassis/transmision/engine and other assorted sundries- obvioulsy there is more sprung weight than unsprung weight.

    What components comprise the unsprung weight- well we have tires/wheels/lug nuts/rotors/calipers/knuckle/hub assemblies- it also includes a portion (roughly half) the weight of the axles/control arms and struts- these latter components are partially sprung and unsprung.

    Is less unsprung weight better than more- yup. Actually any loss of weight is good when it coms to accelerating/braking/cornering- loss of unsprung weight has the added advantage of improving the ability of your suspension keeping the tire to the ground (it's primary job). This is what ultimately makes a car handle well- grip!

    What's the easiest way to reduce unsprung weight- well it's not replacing the axles Your wheels are probasbly the easiest place to shed unsprung weight, often tires that are equally grippy sometimes have some differences in weight, the use off aluminum in suspension arms can reduce unsprung weight, aluminum calipers can reduce unsprung weight as can two piece rotors (aluminum hats) and many aftermarket strut assemblies are lighter as well.

    You can trim 10+/corner of unsprung weight w/ careful choices of parts, but as you can see you can just as easily add to unsprung weight as well.

    You'll notice that many of the unsprung components are also rotational- tires/wheels rotors- having these lighter also enhances acceleration and braking- to a much higher degree than simple loss of non-rotational weight (again all weight loss is good, just some is better)

    And remember after all your trying to lose weight to make your car go faster. If your car is a stock 1.8 engine i wouldn't even think about weight saving as a solution to improving performance, just go and buy a KLZE engine.

    On the track its different as your trying to get rid of that annoying understeer / oversteer / body roll and balance the car so you can break less really.



  • I just got mine fitted yesterday at a windscreen place. It's one job I CBA doing myself. Don't forget to get a new trim/seal, I did… So ended up using some generic stuff, looks ok, better than my OEM one that had peeled back and started flapping about :lol:

    If it stops raining/sleeting/snowing I'll take a pic. No spoiler on atm. Boot shoots up like a rocket !


 

Copyright 2021 UK-MX3.com | Powered by NodeBB