SstennizZ 1992 KL-ZE
-
@b882555db8=unclegreg:
First of all, nice MX-3. Lovely work.
Interesting that you use KL02 VAF along with the ZE. Are you also using the K8 ECU? It would be interesting if you could compare KL36/31/Probinator and JE 50 versus K8 and KL02 at the dyno.. I've always wondered which combo who suits the Curved Neck KLZE best. I've tested all these and i.m.o K8 and KL02 feels best.I'm not running a full ze.
Combi kl-02vaf, kl-02ecu with de chip and de fuelmaps did 189 bhp. Running rediculously lean.. 12th of march next run with same setup but instead of de fuelmaps the ze ones on the de chip, walbro pump and running the perferct 13.2 a/f @ wot. I'm willing to try different setups, but dyno shops here ask around 80gbp per run….. So if i get even a little more than last time, i'm happy..
-
£80 :o That's robbery. And I thought we had it bad here at £50 per 2 runs…
Thumbs up for the wideband, they really are invaluable. Good luck with the next dyno.
-
lol yeah, wideband.. Dont leave home without it.. ;) still need to get a good pod for it though..
-
So, just had a nice little trip with our daily Twingo in order to get the mx circuit ready! :P
At first I wanted to order those new semis, but they are unfortunately no longer in production. Through a supplier I came across a set of 15 " 1xused HANKOOK semi slicks! :P Without wheels though.
Through the internet I now have a set of 7.5j, et 37 MOMO wheels, which I immediately dropped off at the shop.. So I'll be picking them up next week! :P
Only little problem now is that I can only put them on at the track, because they make me sit about 3cm lower than with the 17" and with the 17 I at some points have only a 6 cm clearance under the car.
But hey, bag em, and in the trunk they go.. :P Jack and wrench along and off I goooo! :lol:
I'll try to take a picture on monday. Will not be very spectacular, since the rims aren't so neat anymore, but still .. ;)
-
Decals been put on today! :P Not to happy about the alignment of one of the 8's, but looking good enough for now! Also took out the rear seats so the trackwheels fit in. :P Have a big car event tomorrow at the TT Circuit Assen, so here's a starter pic, more tomorrow.. ;)
-
Looking good :D
-
Me at TT Circuit Assen - Team MonkeyRollers - Automaxx Streetpower 2011:
I'm the monkey on the right:
-
Decals likey :D Car looks nice
-
Looks great man! are your wheels 7.5J?
-
No mate, 7.. And thanx! :p
-
Got some new stuff and stuff coming soon! :P
First my nifty CF hood:
Weighs about 33 lbs with functional scoop.
One of only 12 testmodels made by pakfeifer. Ended up to be to expensive to produce (aluminum subframe and high grade gold reflecting carbon fiber), so the ended up producing it with a bulkier and bigger scoop and cheap silver reflecting cf.
Fits nicely for a testmodel.Next week I'm getting a set of new front wings:
I hope to get them on before japfest.
Also hope to get my front bumper cleaned before japfest. Though going to be tough since I need to swap my transmission and driveshafts before the 8th of may too.
-
Looks very good mate, love the cf hood.
Although didn't you have mx up for sale a while ago?
-
awesome motor cant wait to see it at japfest!!! 8)
-
Got the car back from the customizer.. :P
PIIICCCSSS:
Old:
New!:
Still needs a nice grill in the big opening and the nice grills dj's got for me, but looks awesome already! :D
-
looks gorgeous :wink:
-
Thanx mate!
Had a nice pre-japfest meet yesterday:
http://sstennizz.hyves.nl/album/63728716/JAF 2011//
-
your car is looking hot mate :)
-
looking great love the front bumper
-
love it. Did my bumper like that when I first went ZE, but it cracked so had to give up on it. You've inspired me to try again though :) That hood is very nice.
-
nice hood and wide mouth :wink:
it's funny we virtually did the same mods at the same time… :o
