V6 running badly



  • Mixture Tuning :shock: Carbs.

    Its all Controlled via ECU now and AFM.



  • Hi all
    Is it posible for the timing belt to jump on one cam say just one tooth and couse this sort of problem.
    Regard's
    Alan.



  • @3949969a4a=Alan:

    Hi all
    Is it posible for the timing belt to jump on one cam say just one tooth and couse this sort of problem.
    Regard's
    Alan.

    Yeah could cause the problems you described.



  • Hi Mechanic
    The original problem went away when i moved the dizzy round and once you get the car moveing now it goes like it should it's just the low ens of the rev's that is the problem and i can't find a happy medium by moveing the dizzy.
    I have it booked in for a mot on saturday morning do you think the emisions will be up the wall.
    Thank's
    Alan.



  • I would imagine that the emmsions will be out if the timing is not set up, you made it run better by getting the timing closer by changing the dizzy.

    So i would deffinatly check timing.



  • If youve jumped a tooth on the cams then you could end up in a pretty bad state, the jumped tooth will either have advanced or retarded the camshafts, therby doing the same to the valves, could end up with a valve smacking into the piston. Why do you think it might have jumped a tooth? If you seriously suspect it to have done so Id sort that out before going any further, not just because it could turn your engine into an expensive paperweight, but also because if they cams/valves arent in the positons they should be in then you could have compression loss due to the valves opening prior to tdc, or the valves opening to late, which would mean your not getting enough air and fuel into the chamber, so would have awful running from those effected chambers, youd also have compression build slightly due to the ex valve being shut when it should be open to vent the fumes.

    Had a similar occurence on 2 bikes, one was a non runner, some idiot advanced the cams so much trying to get it working that it was actually sucking air in through the exhaust system, the other was when someone had changed out a shim for a much larger one as opposed to the 80p spring that I bought for it to get the auto decompression working, only realised something was wrong when it burnt the ss pipework and set fire to the glass fibre in the exhaust can. I thought it just ran like s@#t cos it was a 22 year old bike!



  • @6d2cf6a169=Jesta:

    Had a similar occurence on 2 bikes, one was a non runner, some idiot advanced the cams so much trying to get it working that it was actually sucking air in through the exhaust system, the other was when someone had changed out a shim for a much larger one as opposed to the 80p spring that I bought for it to get the auto decompression working, only realised something was wrong when it burnt the ss pipework and set fire to the glass fibre in the exhaust can. I thought it just ran like s@#t cos it was a 22 year old bike!

    sorry but hahahha…

    Bodge jobs at there finest.



  • Take your distributor cap off and look at the backing plate, behind the rotor button it is probably cracked and causing the spark to arc.



  • @66684ce1ce=Lori:

    sorry but hahahha…

    Bodge jobs at there finest.

    Dont be, couldnt agree more. Dunno why people that dont have any rational thought allow themselves to do these things, you should have seen the camshafts, they were burnt/scored to hell, they should stick to doin oil changes if theyre not gonna read a manual, ask questions or arent any use with a socket set in general.

    Its all well and good trying to do things yourself to save money, hell Ive saved thousands aswell as earnt a few quid doing stuff for other people. But the stuff you come across just leaves you thinking 'why, why would anyone do this?' A mate bought a zx6r same like I have, though it had been turned into a track bike, brought it round a couple of days later complaining it ran like crap, one look and there was no ram air intakes or resonators, therefore no direct feed of air. Had some in shed, put them on, let him go for a run, still complaining about performance and how it was better if he covered the intakes with his hand, took the tank off, opened the air filter housing, no filter at all! Its ridiculous, when I service my filter every couple of months and see the amount of dead flies, leaves and other junk in there it horrifies me to think what has or could have gone through the engine, what the point, carbs need vacuum to operate properly and any aftermarket filter is gonna give you all the air flow youll ever need, my bike did 150mph with the standard filter and could get upto redline with no issues, so why whoever felt the need to take out the filter completely just dont make sense.

    Theres a progression of learning to do things for yourself and then theres jumping in head first, the latter always ends in problems!



  • whens the last time you changed yours o2 sensors they are persihable parts and alot of people have found vast inprovements on smoothness and accelleration when replacing them. they might not show a code but if they have been on the car for 15 years chances are it wouldnt hurt to replace them with new ones.


 

Copyright 2021 UK-MX3.com | Powered by NodeBB