My project Log
-
Well the black one has gone.
Managed to get off it
Both drive shafts
Both front Calps
Both front hubs (rears were a no-go)
Engine Loom
All shocks and springs
both rocker covers
The big bit in the middle covers the rocker covers
every plastic container
Rad + the twin fans
few pipes
every nut and bolt I could find
V6 wheels
ECU + Ignition
2 Knuckles
Jap Space saver.
&Brains on how there built, how the insides are connected + how it feels to be shunted up the rear by a driver :P
-
WOW i thought my garden was a mess LOL
Nice work, we will be bringing all of ours to yours then, I have learnt so much by stripping a couple of others too.
Room for another one now then :)
-
Thats my mate Rich's field, He used to race 3SGTE engines in any car he could get them mounted to :)
That man has skills and for £30 per hour, he won't to a half-job, if it's not perfect he won't let you have the car back :)
He has a porshe sitting rotting in that field, (The same model as in the James bond film, its a sub in the film)
-
@cae697ca03=Lori:
He has a porshe sitting rotting in that field, (The same model as in the James bond film, its a sub in the film)
That would be a lotus then :?
-
Yeah, I always get them mixed up
-
@a530b909f8=nightstalker:
@a530b909f8=Lori:
He has a porshe sitting rotting in that field, (The same model as in the James bond film, its a sub in the film)
That would be a lotus then :?
Yeah :)
-
If he is splitting it, stick the wheels on yours 8)
-
Might ask him :)
-
@17a1c89dee:
If he is splitting it, stick the wheels on yours Cool
@17a1c89dee:
Might ask him Smile
If you don't want em…..
I'll take em!!! :wink:
However.. I think they may be 4*114.3 PCD
-
I know what u got done today! Video's up and what u think of it?
-
DAMMIT lol…. oh it sounds so much nicer, I'd video it BUT it's pissing it down with rain atm.
I am indeed, CATless.
-
Retractable mirrors have arrived :)
Drivers side one fitted.
Migrated the motor over to the current wing mirror + added heated glass.
All Ihave to do it is wire the motor and the headed glass in to the Bongo and rear demister :)
-
Both are fitted :) and fully working, Inc the heated wing mirrors running with the rear demister :)
-
Sweet…
I tried ages ago to do it... but the Bongo Mirror Switch acts as an Immobiliser on my motor.. :? Turn the key, car fires up, then dies... Put original Mirror switch back in.. no problems..
Don't really know how to figure that one out... :shock:
-
No idea,
Just looked at the bongo switch i got with it to find out what 2 wires were missing on mine & ported them over.
Ran 2 cables from there out through teh firewall to the engine bay.
Ran 2 cables down under each wing and into the door (behind the hinges) and back into the door with the main loom.it's a closed system. All i'm working on now is a system where when the engine turns off, the retract automaticly and go out on engine start.
-
- Glad to hear they worked out for you.
-
Delivery today :)
First off teh new plate arrived..
Looks rather spiffing, it's also on one of the angled brackets :)
Also, the rest of the Cruise Control parts turned up :)
Inc the rear bumper reflectors with light brackets so I can wire them up with the normal lights :)
Going to start on the AC removal weekend with some luck :)
Soon I will have the only Eunos Presso with Cruise Control.
MX3's had it in Canada but from what I can find out, it was never an option on the imports.
-
Go on Lori, tearing down the bounderies of normal mx-3's everywhere :lol:
Seriously though niceeeee.
-
I have years to get this project done and dusted, it's a long list of wants but I'm only 29 and I've only just started waiting.
-
Quick update.
Painted very quickly the Ebay eye brows and my Wind thingys matt black to see how they look.
The windy thigns look a lot better but I think the brows are a little to short for my tastes.
Also, Don't spray in the kitchin :)
