KLZE swap



  • what parts do i need to keep of the k8 engine for the klze ( i am using a mx6 doner car)

    thanks



  • air flow meter marked je50 on k8
    k8 distributer.
    Cant remember about spark leads, might need them.

    if i think of any more i let you know.



  • @c0998363a7=Garfy1981:

    air flow meter marked je50 on k8
    k8 distributer.
    Cant remember about spark leads, might need them.

    if i think of any more i let you know.

    thats upsetting i just sold the dizzy and leads :cry: :cry:
    thanks



  • woops!, well im sure you need distributer, unless you can hei mod the mx6 one im not sure? marco is the man in the know how!.
    Its only a possibility about leads, if you can use mx6 distributer you might be ok.

    heres a swap ref for you.

    http://www.mx-3.com/swap/ze-swap.php

    written by the first guy in the uk to do a ze swap on a mx3.



  • thanks for the link should help allot thanks



  • had a quick read, and its not been edited but you definately need a je50 air flow meter not a mx6 one. Surprised thats never been edited.



  • @b8ff71d8c8=Garfy1981:

    woops!, well im sure you need distributer, unless you can hei mod the mx6 one im not sure? marco is the man in the know how!.
    Its only a possibility about leads, if you can use mx6 distributer you might be ok.

    I have got a KLDE dizzy off of a V6 probe on my KLZE, if you have still got a K8 engine spare, keep it or strip it, I had to change the steering pump over too. you should be able to use ZE leads



  • @88484709ff=mx3gulf:

    @88484709ff=Garfy1981:

    woops!, well im sure you need distributer, unless you can hei mod the mx6 one im not sure? marco is the man in the know how!.
    Its only a possibility about leads, if you can use mx6 distributer you might be ok.

    I have got a KLDE dizzy off of a V6 probe on my KLZE, if you have still got a K8 engine spare, keep it or strip it, I had to change the steering pump over too. you should be able to use ZE leads

    thanks, ive still got the k8 but its blown :cry:



  • I think it's more about the year of disty rather than the car it came from. It's just easier to say 'use the one you had with the k8' as it will match your harness. The order of pins on the 3 pin plug changed at some stage, which can be rewired if yours happens to not work.

    The other difference is 94/95 or thereabouts have two cam sensors, a 6 vane and a 180 sensor, which is what I needed for dual trigger megasquirt.



  • exhaust manifolds and mounts need swapping, I kept k8 dizzy, leads don't need swapping think they are the same.

    Also if its a Straight Neck (MX-6 is) then you'll want a battery relocation kit and move the expantion tank over and remount it.


 

Copyright 2021 UK-MX3.com | Powered by NodeBB