DJMARCOPOLO'S - The GREEN RIVET



  • These are my 2 MX's I am currently working on.

    The green one is a 1997 1.8 V6 80k miles, I have owned for over a year now, bought it for £800 from a woman who could not afford to run it in plymouth and had let it slip on condition and maintenance, apart from the 2 years she owned it it was fully serviced.
    So far with the green one I have done a full service, 3 new wheel bearings, new discs all round with pads, new front callipers, brushed aluminium bezel, set of BBS 5 spoke alloys and enamelled in white, sportex stainless system with 3" tailpipe, all lights front and rear flyeye tinted, custom 1k sony sound system with fully fitted tweeters + mids with twin subs in boot. The lacquer had peeled off the bonnet so to save money replaced the bonnet with carbon printed vinyl. I would have spent more on this but last year I saved 3 MX's from the scrap yard fom lazy owners with small faults.

    For 2010 so far…...
    I have a pair of AIT YOS side skirts to fit
    Pair of DTM citreon saxo splitters to fit
    Engine enamelling
    Custom build sub box in rear either side of boot for more space
    Engine management re-map
    new condenser to fix the aircon

    The black/green one is a 1995 1.8 V6 EQUIPE special edition 116k miles
    I saved this from a scrap yard in bognor regis, it cost £130 including delivery to southampton from the yard. So far I have fitted new cambelt, new water pump, new wipers and full standard exhaust.

    For 2010…..
    MOT, full service, leather seats repaired, alloys chromed, engine enamelling, replace all brakes discs + callipers, underside spray job, heavy cut and polish to remove strap marks on body, surface rust appearing on sun roof, replace the number plate light mounts.
    If I keep this one then the list of things to do for 2010 on the green one will move down to this list

    I am considering selling one of these in march/april time, it will probably be the green one as the more I find out about the equipe and the little extras and differences that are included that are not available on a standard one is making me want to keep that one more than the green one, if you are interested just send me a PM and ill offer members first choice before listing it








  • Loving both sets of wheels 8)



  • Lovin both cars TBH.



  • @e2940586f7=nightstalker:

    Loving both sets of wheels 8)

    The wheels are from a renault clio, found they have the same wheel nut spacing so buying off the shelf wheels I started searching other makes, found them, they are hand painted with white radiator paint (so they dont go yellow with heat) and then spray lacquered.
    The equipe wheels are a mess but I have the original sales brochure now and found they are polished aloy rim with the spokes painted silver so will be after putting back to original or all chrome.

    @e2940586f7:

    Lovin both cars TBH.

    Thanks, falling more for the equipe now, all the unusual added extras are quite appealling, has lights inside the door locks, the leather SE extras. The leather seats have turquoise stitching unique to the equipe model to match the graphics



  • what extras the equipe come with over normal ?



  • @d0bc712bb1=Lori:

    what extras the equipe come with over normal ?

    Black with green metallic flake paintwork (only available on the equipe comes from mazda 323)
    Half black leather / white velvet interior with turquoise stitching
    Lights fitted inside door locks on timers
    Polished metal OEM alloy wheels ( not painted as standards)
    black leather covered door cards
    Thats what I have found out so far>>>



  • how have you found aero wipers on a mx3?

    had a set on past vw's but the windscreen is alot less slanted.

    do they jump across at speed or are they ok?



  • Nice cars!
    Shall you lower any of them?
    How does the AIT YOS side skirts look like?



  • Nice cars, how are you planning to remap ECU?? Thought MX3 ECU's were not remappable or are you planning to install new ECU??



  • @72fa68149f=Mike:

    how have you found aero wipers on a mx3?

    had a set on past vw's but the windscreen is alot less slanted.

    do they jump across at speed or are they ok?

    They seem to be fine, i had a cheap pair that did not bend properly around the passenger side window but a different brand pair work fine.
    These are the set I bought for the new MX £9.99 for set of 3 + 3 free air fresheners and they fit round the screen perfectly.

    http://cgi.ebay.co.uk/MAZDA-MX3-MX-3-1991-1998-FLAT-WIPER-BLADES-20-21-21A_W0QQitemZ220542596722QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item33595cf672

    @72fa68149f:

    Nice cars!
    Shall you lower any of them?
    How does the AIT YOS side skirts look like?

    I cannot lower them as my driveway doesnt have a drop curb and I dont intend to pay the council a years worth of council tax just for £400 of building work.

    I cannot find a pic of the AIT YOS skirts on an mx but this is the same skirt fitted to a toyota yaris

    @72fa68149f:

    Nice cars, how are you planning to remap ECU?? Thought MX3 ECU's were not remappable or are you planning to install new ECU??

    I contacted a local company who said they could remap it and I have seen 3 remapped ECU's on ebay sell for MX3's in the past year, I will look into it in more detail and find out.



  • Cool cars, diggin the white rims!

    I stumbled across those AIT YOS skirts off ebay, and then saw the postage price :o
    http://cgi.ebay.com/ebaymotors/AIT-YOS-side-skirts-1992-1995-MX-3_W0QQcmdZViewItemQQhashZitem2c519cedcbQQitemZ190347800011QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

    They look very cool if there the same ones?!



  • Right thought I would get my teeth into the Equipe this week as its been stood doing nothing for 3 months since I fitted new cambelt and water pump in january as I have nearly finished fitting out my speedboat for the summer.

    This Week I have…......
    Purchased a 4" jap style rear box
    New filters for the new induction kit and oil breathers
    Chrome paint for the OEM alloys
    Bought a new radiator with 2 fans fitted instead of just the one standard

    I spent an evening and painted the engine as pictured below.

    This weekend is the big one, exhaust fitted, new front discs + pads new radiator going in, new abs sensors plus new filters and mushroom filter on the induction kit, fit LED and Xenomn bulbs all round and the fly eye on the lights then its an MOT wednesday.
    PLUS the EQUIPE is being featured in a promotional film for a cleaning company who are using it as a demo vehicle for their website for its car valeting section as the seats are white velour and filthy and makes an ideal demo car

    also a new drive shaft, cv joint and wheel bearing going in the green one too



  • Lookin good bud :)

    What paint did you use for it?



  • Very high temperature enamel at £3.99 a tin
    used half of each tin on there



  • looks great, like the rad holder



  • Looks goodl! :)



  • Engine bay looking good. How much was the chrome paint for wheels?? Not really heard of a really good chrome paint available TBH, the ones that give quite a good finish are alot of work to do so and very expensive, still I gather you are getting car all tarted up for japfest, will cast my beady eyes over chromed wheels when done and give my honest opinion if you don't mind, Just interested being a paint sprayer LOL :wink:



  • Had a very productive day today on the the Equipe

    New radiator fitted and working
    New jap dome air filter fitted and custom made a mount for induction kit
    Removed ALL brake components on all 4 corners, run them all over with a large wire wheel on a grinder, painted fronts, new pads all round and new pin kits fitted to fronts, drained system and fresh new brake fluid.
    Fitted Brand New expensive exhaust rear box.
    De Badged and replaced with mazdaspeed and a halfords V6 badge on rear( on offer - sorry !!)
    Removed Boot trim and tightened down rear spoiler
    Fly eyed rear lights.
    New number plates all round with chrome mounts for a bit of bling

    Quite happy with the way its going heres some pics, I am also doing a drive shaft soon on the green one and will do a photo log on how to do it



  • Nice, its all coming together for Japfest :D



  • Another Update, now got a specialist marine valeter to have a go at properly cutting away the scratches in the paint, as long as they arent into the undercoat he can make them vanish so that is booked for next week, have also found a local training center who does courses for car dent removal and found like all training colleges they need things to practice on so for £100 I can have a group of students remove the 40-50 car park dents the Equipe has got in its sides and only go without the car for a week.



  • All brakes now fitted and fully reconditioned plus new pads all round, the new exhaust is fitted and sounds amazing, well worth the extra £20 for the larger bore. :lol:

    Had the old problem of the rear number plate lights hanging out because the mount had rusted away and came up with this idea that has saved ££££ to get it MOT worthy because mazda want £85 for that piece of metal :shock: :shock:

    A pair of white LED windscreen washer jets fitted to a white piece of plastic window facia, cut to size and the wahsers were easy to fit with a drill, gives the back end that distinctive led white glow to light the plate up. :D

    Now found the radiator fan has packed up so need to sort that before MOT next week, if anyone has one I am very interested :(

    some bonehead at work decided to spray his yacht himself without tenting it and has covered 6 cars including mine with white epoxy based over spray, he tried in vain to wash it off conventially and failed miserably so next week I now get a free full valet to professionally remove the paint which has been quoted at £120 a car, so will be sparkling in time for japfest :D :D :D :D


 

Copyright 2021 UK-MX3.com | Powered by NodeBB