Pringle_addict's - '93 MX3 V6 - Restoration



  • Hi, and thanks for the info and welcome.

    Pictures will follow but I'd like to do a full 'detailing-world' style before/after format. At the moment she's getting a full going over with my Megs G220 and Sonus SFX polishes (1 to 3). This will be followed by Autoglum SRP, EGP and two fat layers of Collinite for that deeeeeeep gloss look.

    Thanks for the re-assurance on the bumper - I guessed that would be the case, but always nice to have it confirmed.

    She's had a respray at some stage on the passenger door and the overspray on the fore and aft wings is pretty faded so this will take some time to correct.

    After peeling off the most minging fake wood veneer trim from the air vents and centre console, the interior is looking lovely now - no holes, rips tears or scuffs. Plus she comes with the original alarm and stereo, so she's pretty much standard.

    Despite the paint, she was still a bargain at £650!!



  • my standerd allys were the same dry and rough to the touch no light gloss on them but then there are 2-3 difrent standerd allys
    i have 2 mx3s both have nackerd window seels
    to get new seel from mazda £90 each

    but welcome to site hope to see pics soon



  • with regards to your window seals. mine on the doors are gone. hard to find on scraps worth getting. and can only get new from mazda. for a grand sun of 300 and must be paid before they order from japan. following that with the others they are usually tacked down with some normal window sealent.



  • welcome and are we are to assume that you are addicted to pringle potato chips or maybe pringle means something else??? lol :shock:



  • Thanks for the responses guys.

    @2fb8826743:

    welcome and are we are to assume that you are addicted to pringle potato chips or maybe pringle means something else??? lol

    Yes, it is the chips. I don't (yet) have a penchant for Emelyn Hughes style jumpers… but give it time!

    Should be taking some decent photos this weekend (if the sun comes out to play).

    Cheers



  • Pringle, welcome mate… glad to see another local boy on here. Let me know how the polish job goes, as mine is red, and in a poor sorry state - seriously brings a tear to the eye... if yours looks good fancy a job as a valleter?? lol



  • Hi Johno,

    Local indeed. I work in Cambridge, so you may see the mx round the airport in the future.

    To be honest the standard paintwork comes up beautifully with very little work. The difficult bits so far have been the bumpers, the spoiler and the mirrors. They all seem to be made from different plastics, and respond differently to polishing. The mirrors have gone a horrible colour, so they are due to be re-sprayed (red or black??!? hmmm). The spoiler came up really well (eventually) and I've not spent that long on the bumpers as they are due to be changed (rear) and resprayed (front) anyway.

    The passenger door had been resprayed at some point and this paint was as hard as nails, so didn't correct as nicely as the soft mazda paint. If you are lucky enough to have completely original paint, then full correction should only take a few (8-10) hours of effort.

    I'll get some shots over the weekend and you can be the judge of the results. :)



  • Nice one.

    Well my paintowrk is almost beyond help… some mug did bad respray on some parts years ago, well before I had her, spoiler has worn through to white in patches, and very pale in others, sunroof faded, patchy fading on roof, bonnet wings and doors all fine, however lots of chips on bonnet, as for my bumpers... had a few chips, but used to come up beautifully, however in a moment of madness, allowed the poilish guys at Milton Tesco to clean while I shopped... they did a great job on the mrs' car, so trusted them... fooking power hose stripped paint clean off the bumpers... so they now look like red dalmation!!!! As for my mirrors, christ, looks like someone polished with paint thinner or something!!! If I could afford respray, I would have whole thing blown over, but thats £300 I am not prepared to pay out right now.



  • i have a set of red mirror covers if you want. in great nick.

    yours if u want them?



  • Really? That would be cool.

    Do they clip on to the std mirrors, or are they replacement casings?

    I'd be happy to pay for them though (inc shipping).



  • unfortunately they are the actual housings, so you'd have to take the mirror apart. but if you have patience its not hard!!

    ah your grand, just shipping and we'll leave it at that! and actually you seem to know quite a bit about polishing so if you PM me any info about a good polish/wax etc for the car and best methods, we'll consider that payment!!



  • I need a passenger side mirror badly! Send me your old one PLEASE :D Will pay for shipping ;)



  • wait im confused.

    so is it

    my mirrors to pringle lover

    and

    pringle lovers mirror back to marco?!



  • :lol: something like that! I just need a passenger mirror housing, as some scrote bent mine directly downwards, so my car looks sad :( Don't care about what the paints like, as long as it's not limp and cracked!



  • hay marco if you want i will send you a complet red mirror faded but no bugering about with takeing it apart lol



  • yeehaw! sounds great james :D Send me your paypal and I'll give you whatever £££



  • ok pm me an address and i will try fined a shoebox to put it in then fined out what the postage is



  • Hi Guys,

    Managed to take a few 'after' photos yesterday after work. Hope these give some indication of what's possible with the right tools, and lots and lots of time ….

    Roof - Before

    Roof - After

    Rear Corner - Before

    Rear Corner - After

    Interior - Before (nice mock-wood-effect panelling)

    Interior - After (much nicer!)

    Driver's Door - Before

    Driver's Door - After

    Passenger Front Wing - Before (note overspray from previous door respray is fading at a different rate from the original paint).

    Passenger Front Wing - After (some fading, but an awful lot better).

    As you can see, she's coming up very nicely. Once I get the front bumper replaced (paint peeling) and new Number plates on, I'll post some longer range shots of her in all her glory.

    For those that are interested, I'll also do a 'how-to' guide on the cleaning and polishing processes.

    Cheers



  • Today's jobs completed:

    Wiper arms sanded and resprayed (satin black)
    Front Bumper sanded ready for priming
    Paint obtained from Halfords - Paint Code SQ - Blaze Red
    New Wiper blades bought and installed
    Front seats and mats wet-vaxed.

    Just need to get some filler primer now for the bumper (scratches) and laydown a few light coats ready for resanding. Should be finished one evening this week.

    Will update with more pics when available.



  • sounds good! you and mechanic gotta be the 2 quickest when it comes to getting stuff done to the car! rest of us do it in long lazy bursts of energy!

    well done, sounds really impressive what you've got done so far, cant wait for the pics.

    still waiting on the "Beginners Guide to Detailing" though!!


 

Copyright 2021 UK-MX3.com | Powered by NodeBB