<![CDATA[Push Button Igniton]]>hey guys,

anyone fit a push button ignition?

If so, could you tell me which wire i can hook up a switch to as
i'm getting this,

http://cgi.ebay.com/UNIVERSAL-PUSH-BUTTON-SHIFT-GEAR-KNOB-VL-RB30-TURBO-CAR_W0QQitemZ200170918581QQihZ010QQcategoryZ43807QQssPageNameZWDVWQQrdZ1QQcmdZViewItem,

and wanna hook it up to start the car.
thanks

]]>https://www.uk-mx3.com/topic/331/push-button-ignitonRSS for NodeSun, 10 May 2026 14:22:59 GMTSun, 11 Nov 2007 13:15:57 GMT60<![CDATA[Reply to Push Button Igniton on Sun, 11 Nov 2007 13:15:57 GMT]]>hey guys,

anyone fit a push button ignition?

If so, could you tell me which wire i can hook up a switch to as
i'm getting this,

http://cgi.ebay.com/UNIVERSAL-PUSH-BUTTON-SHIFT-GEAR-KNOB-VL-RB30-TURBO-CAR_W0QQitemZ200170918581QQihZ010QQcategoryZ43807QQssPageNameZWDVWQQrdZ1QQcmdZViewItem,

and wanna hook it up to start the car.
thanks

]]>https://www.uk-mx3.com/post/331https://www.uk-mx3.com/post/331Sun, 11 Nov 2007 13:15:57 GMT<![CDATA[Reply to Push Button Igniton on Mon, 12 Nov 2007 12:09:24 GMT]]>theres about 6 wires, 4 for the different positions, and two black ones to power each of these, if you connect a black one to each of these seperately one will turn the starter without ignition, those are the ones you need to connect, although theres probably some science behind the two black positive wires, ones probably meant to go to ignition, while the other powers the starter maybe? so dont cut the wrong black wire :P

]]>https://www.uk-mx3.com/post/5861https://www.uk-mx3.com/post/5861Mon, 12 Nov 2007 12:09:24 GMT<![CDATA[Reply to Push Button Igniton on Tue, 13 Nov 2007 10:31:26 GMT]]>thanks, but i would like to still need the key!

or am i being stupid, do you still need the key to do this?

]]>https://www.uk-mx3.com/post/5863https://www.uk-mx3.com/post/5863Tue, 13 Nov 2007 10:31:26 GMT<![CDATA[Reply to Push Button Igniton on Tue, 13 Nov 2007 12:32:37 GMT]]>you still need the key to turn the ignition on, you just don't need one to turn the starter, so if you pressed the button the starter motor would just continually turn, but the engine wouldn't fire as the ignition system wouldn't be on :wink:

]]>https://www.uk-mx3.com/post/5864https://www.uk-mx3.com/post/5864Tue, 13 Nov 2007 12:32:37 GMT<![CDATA[Reply to Push Button Igniton on Tue, 13 Nov 2007 18:48:40 GMT]]>You would also still need the key in to turn the immobiliser off.

]]>https://www.uk-mx3.com/post/5865https://www.uk-mx3.com/post/5865Tue, 13 Nov 2007 18:48:40 GMT<![CDATA[Reply to Push Button Igniton on Tue, 13 Nov 2007 19:24:19 GMT]]>would that only be if you dont have an aftermarket alarm and immobiliser

]]>https://www.uk-mx3.com/post/5866https://www.uk-mx3.com/post/5866Tue, 13 Nov 2007 19:24:19 GMT<![CDATA[Reply to Push Button Igniton on Tue, 13 Nov 2007 20:15:00 GMT]]>the immobiliser would work the same as before as your still using the same wiring :wink:

if you could turn the engine over with the immobiliser on it'll still do that, usually its the fuel/ignition spark thats immobilised, companies may also immibilise the starter motor

]]>https://www.uk-mx3.com/post/5867https://www.uk-mx3.com/post/5867Tue, 13 Nov 2007 20:15:00 GMT<![CDATA[Reply to Push Button Igniton on Thu, 15 Nov 2007 12:30:35 GMT]]>i have a starter button on my car
You will still need the key to get the imobilizer off, but i dont know the wires .
It add's a little security to the car, because if the "son of a bit***" that's stealing the car doesnt have any idea of what that does … even do he breaks the ignition on the car, the car wont start...

Ill try to explain this :
If you dont put the key, the button wont do anything
If you put the key, and turn it until the car starts , it wont do anything also
If you put the key, turn it until the imobilizer is off, and then push the button, the car start's ... hope you get it ;)

]]>https://www.uk-mx3.com/post/5878https://www.uk-mx3.com/post/5878Thu, 15 Nov 2007 12:30:35 GMT