<![CDATA[Ignition Leads]]>Does anyone have any experience with either the Splitfire or Magnecor leads? They're both around the same cost, but I wasn't sure if one was better than the other.

Any experiences/stories are welcome, cheers.

]]>https://www.uk-mx3.com/topic/1326/ignition-leadsRSS for NodeSat, 12 Sep 2026 01:45:45 GMTTue, 01 Jun 2010 21:41:43 GMT60<![CDATA[Reply to Ignition Leads on Tue, 01 Jun 2010 21:41:43 GMT]]>Does anyone have any experience with either the Splitfire or Magnecor leads? They're both around the same cost, but I wasn't sure if one was better than the other.

Any experiences/stories are welcome, cheers.

]]>https://www.uk-mx3.com/post/1326https://www.uk-mx3.com/post/1326Tue, 01 Jun 2010 21:41:43 GMT<![CDATA[Reply to Ignition Leads on Tue, 01 Jun 2010 21:53:02 GMT]]>As a personal choice ive used Magnecor leads before and a few friends have used them seemed to be rated very well imo…

]]>https://www.uk-mx3.com/post/15199https://www.uk-mx3.com/post/15199Tue, 01 Jun 2010 21:53:02 GMT<![CDATA[Reply to Ignition Leads on Tue, 01 Jun 2010 21:56:57 GMT]]>Appreciated Rainy. Also, (stupid q probably) but would I be able to re-use them if/when I manage to scrabble a 'ZE?

]]>https://www.uk-mx3.com/post/15200https://www.uk-mx3.com/post/15200Tue, 01 Jun 2010 21:56:57 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 10:01:00 GMT]]>Yep you can reuse them. The lengths might not be perfect (are they ever?) but they'll reach and they will work fine.

]]>https://www.uk-mx3.com/post/15209https://www.uk-mx3.com/post/15209Wed, 02 Jun 2010 10:01:00 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 13:14:23 GMT]]>Thanks Marco. :)

]]>https://www.uk-mx3.com/post/15211https://www.uk-mx3.com/post/15211Wed, 02 Jun 2010 13:14:23 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 17:11:39 GMT]]>the Magnecor leads are rated to be the ones to go for

]]>https://www.uk-mx3.com/post/15228https://www.uk-mx3.com/post/15228Wed, 02 Jun 2010 17:11:39 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 17:19:23 GMT]]>im on magnecor, no problems pukka set of leads.

]]>https://www.uk-mx3.com/post/15230https://www.uk-mx3.com/post/15230Wed, 02 Jun 2010 17:19:23 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 17:20:46 GMT]]>I've got splitfire leads but did not notice any difference over my standard leads.

]]>https://www.uk-mx3.com/post/15231https://www.uk-mx3.com/post/15231Wed, 02 Jun 2010 17:20:46 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 17:21:30 GMT]]>I see some of the guys out there have 8mm leads, however after checking a few sites there are these (http://www.dcperformance.co.uk/cheap/32929/mazda/magnecor-kv85-ignition-leads/mgn-6535.html) 8.5mm leads. Is the extra £30 justified in terms of performance?

]]>https://www.uk-mx3.com/post/15232https://www.uk-mx3.com/post/15232Wed, 02 Jun 2010 17:21:30 GMT<![CDATA[Reply to Ignition Leads on Wed, 02 Jun 2010 18:06:50 GMT]]>How much does it cost to do the coil on plug conversion?

]]>https://www.uk-mx3.com/post/15246https://www.uk-mx3.com/post/15246Wed, 02 Jun 2010 18:06:50 GMT